Tuesday, September 15, 2009


As promised, pics of the Hull.

I have filled and sanded most of the screw holes on the near side in the top pic. And as of about half an hour ago, I have filled the remaining screw holes.

The Epoxy, Glass beads, and microfibers sands easily. It seems like a good mix for filling.

I used a router, a roundover bit and a batten to round over the entrance to the CB for glassing.

And I have glassed the transom. This is a small and uncomplicated area, but it's near vertical, so you have to be careful about runs.

No comments: